- Anti-Vandal
- Surface Mount
- Panel Mount
- Illuminated
- Process Sealed
- Right Angle
- Pushbutton
- Tactile
- DIP
- Slide
- Rocker
- Toggle
- Key
- Circuit Breaker
- Snap-Action
- Capacitive Touch
J152 Series UL Approved, TUV Approved Relay
The J152 Series is an ice cube relay with switching capacity up to 10A. With low coil power consumption and high contact load, the J152 Series 10A switching relay has strong resistance to shock and vibration. Contact arrangements for the TUV relay include 2A, 3A, 4A, 2B, 3B, 4B, 2C, 3C, and 4C. Coil voltage ranges from 12VDC up to 220VAC with DC coil power of .90W and AC coil power of 1.2VA. The J152 offers PC pin or solder lug mounting options. Dimensions are dependent upon style choice with a flange option. Agency approval for this UL relay is E197851.
Features |
Datasheet in PDF |
|
Ice Cube Style Relay Switching Capacity up to 10A Low Coil Power Consumption High Contact Load Strong Resistance to Shock & Vibration |
|
Contact Rating |
UL: 2 & 3 Pole 10A@220VAC & 28VDC General Purpose 4 Pole 5A@220VAC & 28VDC General Purpose TUV: 2 Pole 5A@220VAC & 28VDC |
Dimensions | Contact Arrangement |
Contact Material | Coil Voltage | Coil Power | Contact Resistance |
27.0 x 21.0 x 35.0 | 2C, 3C, 4C | AgCdO | 12VDC, 24VDC, 110VDC, 12VAC, 24VAC, 110VAC, 120VAC, 220VAC | DC: .90W; AC 1.2VA | < 50m Ohm |
Insulation Resistance | Electrical Life | Mechanical Life | Dielectric Strength |
100M Ohm @ 500VDC | 100K cycles, 200K cycles, 500K cycles | 10M cycles, 20M cycles | Contact-to-Contact: 1500V rms Contact-to-Coil: 1500V rms |
Operating Temperature | Mounting Methods | Agency Approvals |
-40C to 85C | PC Pin, Solder Lug | E197851 |
Dimensional Drawing
Schematic
PC Board Layout