- Anti-Vandal
- Surface Mount
- Panel Mount
- Illuminated
- Process Sealed
- Right Angle
- Pushbutton
- Tactile
- DIP
- Slide
- Rocker
- Toggle
- Key
- Circuit Breaker
- Snap-Action
- Capacitive Touch
J115F1K Series UL Approved Relay
Offering wide contact terminals for better heat transfer, the J115F1K Series relay offers heavy contact load up to 60A in a light-weight and small size package. This PC pin mounted relay offers 1A or 1C contact arrangement with coil voltage ranging of 12VDC or 24VDC with DC coil power of 1.2W or 2.25W. Dimensions are 31.7 x 26.9 x 20.3mm. Agency approval is UL E197852.
Features |
Datasheet in PDF |
|
| 1.8mm Contact Gap or 1.1mm Standard Contact Gap Option Wide Contact Terminals for Better Heat Transfer UL/cUL Recognized |
|
 |
| Contact Rating |
1.8mm Contact Gap : 35A @ 250/277VAC Resistive 50K cycles Standard Contact Gap : 60A @ 250/277VAC General Purpose and Resistive 20K cycles 35A @ 250/277VAC General Purpose and Resistive 20K cycles |
|
| Dimensions | Contact Arrangement |
Contact Material | Coil Voltage | Coil Power | Contact Resistance |
| 31.7 x 26.9 x 20.3 | 1A, 1C | AgSnO2 | 12VDC, 24VDC | 1.2W, 2.25W | < 30m Ohm |
| Insulation Resistance | Electrical Life | Mechanical Life | Dielectric Strength |
| 1000M Ohm @ 500VDC | 100K cycles | 500K cycles | Contact-to-Contact: 2500V rms Contact-to-Coil: 4000V rms |
| Operating Temperature | Mounting Methods | Agency Approvals |
| -40C to 125C | PC Pin | E197852 |
Dimensional Drawing
Schematic
PC Board Layout
